MS: Parameters list

Important

The ability to manage over a local network without a security token is blocked by default for security reasons. This may be relevant, for example, when using local control in public places. If this security measure is not needed, disable it on the device by setting the bLc parameter to oFF. Otherwise, requests for changes without this token will not be executed.

To get all available parameters of the device send command {"cmd":1}, for example answer for MS:

{
   "sn":"B081843B6DC878ECBFBFEC0000014D",
   "par":[[68,2,"0"],[125,7,"0"],[70,2,"2"],
          [71,2,"0"],[3,2,"0"],[23,2,"10"],[55,2,"24"],
          [114,7,"0"],[115,7,"0"],[124,7,"0"]]
}

sn - device serial number

par - parameter exchange key

Transfer format is an array of arrays. The first value is number of the parameter, the second its type, the third is string with the parameter value.

For example, turn on the device relay:

{
   "sn":"B081843B6DC878ECBFBFEC0000014D",
   "par":[[125,7,"1"]]
}

Answer:

In response, we receive an updated list of parameters:

{
   "sn":"B081843B6DC878ECBFBFEC0000014D",
   "par":[[68,2,"0"],[125,7,"1"],[70,2,"2"],
          [71,2,"0"],[3,2,"0"],[23,2,"10"],[55,2,"24"],
          [114,7,"0"],[115,7,"0"],[124,7,"0"]]
}

Important

When changing device parameters, the command must contain the key sn

Parameters list

Num	Type	Name	Description
3	(uint8)	controlType	operating mode: always = 0
23	(uint8)	brightness	in arbitrary units (from 0 to 10), device indication brightness
55	(uint8)	relayOnTimeLimit	in hours, time after which a notification about exceeding relay operation time is triggered (Read-only)
68	(uint8)	buttonPressTime	in seconds, button press duration to toggle the relay
70	(uint8)	relayInitialCondition	relay state after power is applied: 0 - off, 1 - on, 2 - from memory
71	(uint8)	externalSwitchType	external switch type selection: 0 - momentary (button), 1 - latching (switch)
114	(bool)	lanBlock	block any settings changes via API: 0 - disabled 1 - enabled
115	(bool)	cloudBlock	block any settings changes and firmware updates via cloud: 0 - disabled 1 - enabled
124	(bool)	childrenLock	lock buttons from changing parameters: 0 - disabled 1 - enabled
125	(bool)	powerOff	relay state: 0 - off 1 - on