Schedule

Important

The ability to manage over a local network without a security token is blocked by default for security reasons. This may be relevant, for example, when using local control in public places. If this security measure is not needed, disable it on the device by setting the bLc parameter to oFF. Otherwise, requests for changes without this token will not be executed.

To get all schedule of the device send command {"cmd":2}. Answer:

{
   "sn":"404CCAAAD4E8A89860609800000149",
   "tt":{
         "0":[[360,300],[480,250],[1020,300],[1320,250]],
         "1":[[360,300],[480,250],[1020,300],[1320,250]],
         "2":[[360,300],[480,250],[1020,300],[1320,250]],
         "3":[[360,300],[480,250],[1020,300],[1320,250]],
         "4":[[360,300],[480,250],[1020,300],[1320,250]],
         "5":[[480,300],[1380,250]],
         "6":[[480,300],[1380,250]]
        }
}

sn - device serial number

tt - schedule exchange key

0, 1, 2, 3, 4, 5, 6 - day number key, 0-monday.

A two-dimensional array with a minimum of one period is used as the argument. The maximum number of periods is set by the parameter maxSchedulePeriod, which is always 16.

Each period consists of pair of values:

• Number of minutes from the start of the day

• Temperature in degrees (*10)

The schedule logic is as follows:

• A single day can have no more than 16 time periods.

• The start of the next period is the end time of the previous one.

For example, set two periods on Wednesday: 8:00 -> 28 °C, 18:00 -> 18 °C:

{
   "sn":"404CCAAAD4E8A89860609800000149",
   "tt":{
         "2":[[480,280],[1080,180]]
        }
}

In this case, if we did not manually set the schedule for Tuesday, then:

• From the start of the last period on Tuesday (in the factory settings, the last period on Tuesday starts at 1320 minutes and maintains a temperature of 25°C) until minute 480 on Wednesday, a temperature of +25°C will be maintained.

• From minute 480 to minute 1080 on Wednesday, the temperature will be maintained at 28°C.

• From minute 1080 until the start of the next period on Thursday, a temperature of +18°C will be maintained.

Important

It is not allowed to send schedules for multiple days in a single request.

Note

The temperature cannot be greater than parameter 26 (upperLimit) or less than parameter 27 (lowerLimit)